Tamiya 1/48 Meteor F.3
Kit 61051 with parts trees from 61083
Click on the thumbnail to go to a full size image.

The cockpit is fairly basic and it's also very black, other than the seat and seat belts.  I tried to highlight stuff a little but it just isn't going to be visible other than the
seat, stick and panel.  Eduard Sutton harnesses were put in, using glue that is cured with UV light.  It really made it easier to do, and that was helpful because
in this case it seemed better to install the belts after the seat was installed in the tub.  I had bought some of the glue on the web, but then I found it was
available at Walgreens and I bought some more there.  The glue is sticky enough to hold the pe in place until it is arranged right, and then you shine the
light on it and it cures right up.  If you have excess glue you can wipe it off before you set it with the light, but it will bring a little paint with it, both acrylic and 
enamel so there may be a little touch up.  So much less hair raising for me than CA.

 Tamiya Meteor F.3 Index Page           My Models Index Page           John Eaton Home Page