">
The Bell P-63
Click on the thumbnail for a full screen image
The MPM 1/48 P-63A
This can be a little
bit of a pain to build, due to poor fit and low pressure injection
molding, but the surface detail is nice and the shape
seems accurate to me. Beware of getting the fuselage glued
together straight, the resin cockpit floor needs a little reshaping or
the nose will
try to go off to one side. The instrument panel and vacform
canopy also need very careful fitting. The Propagteam decals
need to be replaced,
even with an overcoating of liquid decal film the serial numbers and
stars were extremely frail and didn't want to move once they hit the
model.
![](mymodels/p63/tn002p63mpm.jpg)
![](mymodels/p63/tn003p63mpm.jpg)
![](mymodels/p63/tn005p63mpm.jpg)
![](mymodels/p63/tn007p63mpm.jpg)
![](mymodels/p63/tn009p63mpm.jpg)
![](mymodels/p63/tn008p63mpm.jpg)
![](mymodels/p63/tn010p63mpm.jpg)
![](mymodels/p63/tn011p63mpm.jpg)
![](mymodels/p63/tn012p63mpm.jpg)
![](mymodels/p63/tn013p63mpm.jpg)
![](mymodels/p63/tn014p63mpm.jpg)
![](mymodels/p63/tn015p63mpm.jpg)
![](mymodels/p63/tn016p63mpm.jpg)
![](mymodels/p63/tn001p63.jpg)
![](mymodels/p63/tn006p63.jpg)
![](mymodels/p63/tn017p63.jpg)
My Models
Index Page
_________
_________ John
Eaton Home Page