Special Hobby 1/48 Gloster E.28/39
Kit SH48017

An issue with the kit is the length of the landing gear.  It is too tall.  Most of the main gear struts were cut off and the attachment to the wing is via steel pins.  It would
have been better to modify the angle the trailing arms attach to the struts so they are horizontal but by the time the problem was realized it was
too late on this build.  As it is now it probably sits as it would if no fuel were loaded.  There is a lot of photoetch on the nose wheel strut.

E.28/39 Index Page           My Models Index Page           John Eaton Home Page