Click on the thumbnail to go to the full screen image

>The lower turret is somewhat difficult to put together because the guns and the pin that attaches them to the vertical shaft are joined by a strap that must be bent to get the
>proper geometry as they are assembled to the shaft. Arriving at the proper spacing to fit the turret while the guns are parallel without breaking the strap was a challenge. 
>I also found that the turret does not move far enough up into the fuselage in the retracted position when the guns meet the top of their troughs compared to photos. 
>There is a lot of great detail in the model and the parts fit very well.  There is a fair amount of test fitting to find all the correct placements and sub-asemblies must be
>built very carefully to insure that minor missalignments don't spoil later fits.