Golden Era Model Service

High Quality Plan Sets and Laser Cut Partial Kits for Radio Control Aircraft

The top view with the balsa scraps installed and shaped. The aft cowl support balsa has also been tapered to fit the cowl contour.

Assembled and sanded, jig still installed.

The jig has been removed. Later the aft cowl support ply will be sanded to shape.

.6 ounce glass cloth and epoxy resin will be the final step, followed by paint.

First step in forming the landing gear. Note the tape on the upper part, this is where the bend begins.

The K&S Might Wire Bending tool works well. Place the edge of the tape on the center of the mandrel.

Making the second bend.

The completed landing gear. Make the forward bend, then the last step is the axle bend.