The
Benny Boxcar was an early Struck design and was not presented in plan
form until much later. It is a great flyer and builds light.
Wing
Area 300.7 sq in
2.09 sq ft
min wt at 8 oz 16.7 oz.
Tail Area 87.2
Aspect Ratio 7.27
t/c 9.5
Flying weight of prototype with 1 3/4 ounces of ballast for
balance is 15.4 ounces.
The
plans are detailed with building notes and show every part. Plans
are $15 plus postage. Laser cut partial kits
are available for $55 plus postage.
Strip wood and sheet balsa will need to be added. Postage is
only charged
once for orders for
both plans and parts.
To
allow
me to quote the actual cost of postage please contact
me at jeaton@afes.com
with your address and I will calculate the postage.
Part of the plans for the Boxcar