High Quality Plan Sets and Laser Cut Partial Kits for Radio Control
Aircraft
Page 4
Henry Struck's 1937 Benny Boxcar in 108 inch span
Chedcking the level of the top longerons in the stabilizer area. The
3/8 vertical post can also be used to check alignment. It is not glued
at this point, just clamped between the fuselage sides until square is
achieved.
Many construction triangles are used in
the assembly process.
It helps to have the fuselage sides held securely to the triangles in some
locations. The triangles are pinned to the building board.
The 3/8 square post at the end of the fuselage is recessed to allow the
vertical stabilizer spar to be trapped between the fuselage
nbsp;sides. Slight sanding will be required to fit the spar, and it
must be done accurately so the fin is vertical relative to the fuselage.
